Tecno V7 [Phantom Z Mini] Stock Firmware, Stock ROM Download: All Variants

These Tecno V7 Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Tecno Android devices.

Stock firmware are mostly needed to either upgrade your Tecno V7 or flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download links for all the complete Tecno V7, Stock ROM files which can be used to flash factory OS back to your Tecno V7.

How to Download Stock Firmware and Flash Tecno V7 with these Stock Firmwares/ROM

1. Download SP Flash Tool from here and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers here

2. Download the appropriate variant of Tecno V7 Firmware from the list below:
Download 1st Variant
Download 2nd Variant

3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate flash_tool.exe application and then; double-click it to lunch the program.

4. Go to the folder where you downloaded the Tecno V7 Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, select Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Tecno V7 stock ROM and then select "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool will load all the partitions in the Tecno V7 stock ROM you downloaded. From the list, mark all the partitions EXCEPT these three (3): Preloader, UserData and CACHE.

7. Now, select Download on SP Flash Tool.

8. Put off your Tecno V7 or remove battery from it and re-insert the battery again. Connect your Tecno V7 Mobile Phone to the PC and then tap the Power button once.

9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.

10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Tecno V7 to its factory defaults.

For Graphical Illustrations on how to flash Tecno android devices, see here: How to Flash Tecno Android Device: Step by Step with Pictures

Also Read: